Stainless Steel Repair Clamps
Stainless steel repair clamps in 1/2" to 12" sizes and 3", 6" and 12" lengths that seal leaks, cracks and pinholes without cutting out the pipe. Rated up to 350 psi.
About Stainless Steel Repair Clamps
Trilogy stainless steel repair clamps seal leaks, cracks and pinholes on pressurized pipe without cutting out the damaged section. A 304 stainless steel band wraps the pipe and compresses a full-coverage EPDM gasket against the pipe wall as the bolts are tightened.
Ductile iron lugs and galvanized carbon steel hardware provide a secure, even closure, and each size covers a range of outside diameters to accommodate variations in pipe.
Specifications at a Glance
| Specification | Detail |
|---|---|
| Nominal sizes | 1/2" through 12" |
| Lengths | 3" (1 bolt), 6" (2 bolts), 12" (4 bolts) |
| Band | 304 stainless steel (ASTM A240) |
| Gasket | EPDM, full coverage |
| Lugs | Ductile iron |
| Bolts, nuts and washers | Galvanized carbon steel |
Maximum Working Pressure
| Nominal Size | Max. Working Pressure |
|---|---|
| 1/2" to 4" | 350 psi |
| 6" to 8" | 200 psi |
| 10" to 12" | 150 psi |
Full size, OD range, bolting and weight chart in the spec sheet.
Get the Right Part the First Time
Sizes and configurations vary by application. Send us the details below and our team will confirm the spec, check stock and come back with a firm quote.
Start a QuoteWhat to Include in Your Request
- Nominal pipe size
- Measured pipe outside diameter
- Clamp length (3", 6" or 12")
- Quantity
- Service conditions (fluid, pressure and temperature)
Need a part on location this week?
Send us the spec and quantity. We'll confirm availability and pricing fast.